Dealers >>
|
|
PDC
STANDARD EQUIPMENT
- Interlocked I-Beam Mast.
The premium steel mast construction features interlocked steel channel and I-Beam design and roller-bearing surfaces for long mast life. Interlock channel and I-Beam mast accommodates high lifting stresses and maintains load stability.
- Direction Reversing Impact Switch.
A reversing switch, built into the control handle is designed to reverse truck direction on impact with the operator.
- Versatile Braking Systems.
- Two-way mechanical brake in top and bottom of handle arc actuates automotive-type disc brake in proportion to handle movement, allowing operator complete control of braking. When released, "dead man" feature returns handle to upright position, turns off electric power and applies the brake.
- Dynamic brake, actuated by push-buttons in the control handle, provides gentle, jar-free electrical braking for accurate payload positioning and protection.
- Easy Access Service Panel.
Full-access design makes maintenance fast and easy. Hinged doors and removable panels permit quick access to electrical circuitry, drive train and hydraulic components for all normal maintenance.
- Fully Protected Electrical System
Fully fuse protected, heavy-duty industrial contactors are standard. All wiring is coded and has quick-disconnect terminals for easy servicing.
- High Strength Construction.
Unitized continuous welded steel in every Big Joe frame minimizes structural deterioration.
- Dual Tilt Cylinders (PDC only).
For greater safety, less twisting and distortion of mast section.
- Emergency Power Disconnect.
Externally mounted, quick-release battery disconnect is readily accessible to remove all power from truck circuits in the event of an emergency.
- Special Alloy Forks.
Heavy-duty I.T.A. forks are heat-treated alloy steel and formed to preserve full strength at the fork heel. Bottom taper of 14 inches and beveled fork tips allow easy pallet entry and exit.
- I.T.A. Class II Carriage (PDC only).
I.T.A. Class II Carriage makes changing from forks to attachments simple. No tools or pin removal are required. Changing outside fork dimension is equally easy.
- Chrome Plated Lift Cylinder.
For long life and low ram maintenance.
SPECIFICATIONS
Lifting Capacity:
1,500 to 4,000 lbs. at 24" load center
Lift Range: 60" - 194"
Power System: 12V/24V
Turning Radius: From 48"
Travel: Three speeds forward and reverse
(stepless available)
PERFORMANCE:
Travel speeds (in mph) with rated payload up to
|
|
PDCM
|
PDCM
|
PDC
|
PDC
|
|
|
20
|
25
|
15
|
20
|
|
12V
|
NA
|
NA
|
2.6
|
2.3
|
|
24V
|
2.8
|
2.7
|
2.8
|
2.6
|
|
|
PDC
|
PDC
|
PDC
|
EMPTY
|
|
|
25
|
30
|
40
|
|
|
12V
|
2.3
|
2.2
|
2.1
|
2.8
|
|
24V
|
2.6
|
2.5
|
2.2
|
3.0
|
Lift speeds (fpm) up to
|
|
24V
|
24V
|
12V
|
24V
|
|
|
PDCM
|
PDCM
|
PDC
|
PDC
|
|
|
20
|
25
|
|
|
|
EMPTY
|
26
|
42
|
30
|
42
|
|
LOADED
|
19
|
22
|
18
|
22
|
FEATURES
- Advanced handle control.
Big Joe Power Drive Counterbalanced (PDC/PDCM) models come equipped with the industry's most versatile control handle. Speed may be controlled with twist grip or thumb control. Includes 3-speed forward and reverse detent action speed control; thumb control of horn and dynamic brake (optional on PDCM). "Belly-button" switch at end of handle reverses truck direction on operator contact.
- Optional Stepless Speed Control.
- Infinitely variable speed control is available.
- Exclusive power train design.
Engineered for smooth, dependable performance.
Includes:
- Drive Motor.
Ball bearings and Class H insulation provide maximum performance with long life. Disc brake on armature shaft multiplies braking force through the gear reduction to drive wheel.
- Steering.
The entire drive train is ball bearing mounted to ensure long service life and low steering effort. Power is delivered to the floor through a large, smooth rolling polyurethane tire for positive traction and long life.
- Transmission.
Heavyweight ductile iron housing protects wide-faced, heat-treated spur gears; premium ball and tapered roller-bearings; and provides for full oil bath lubrication.
- Easy access service panel.
Full-access design makes maintenance fast and easy. Hinged doors and removable panels permit quick access to battery, electrical circuitry, drive train, and hydraulic components for all normal maintenance. Most major components can be serviced without special tools. | |
| PDC-15 Series 24 Volt |
| PDC-15-60 24 Volt |
1,500 Lbs. @ 24"L.C. 60" Lift, 24V |
| PDC-15-106 24Volt |
1,500 Lbs. @ 24"L.C. 106" Lift, 24V |
| PDC-15-130 24Volt |
1,500 Lbs. @ 24"L.C. 130" Lift, 24V |
| PDC-15-154 24Volt |
1,500 Lbs. @ 24"L.C. 154" Lift, 24V |
| PDC-15-168 24Volt |
1,500 Lbs. @ 24"L.C. 168" Lift, 24V |
| PDC-15-158 24Volt |
1,500 Lbs. @ 24"L.C. 158" Lift, 24V |
| PDC-15-194 24Volt |
1,500 Lbs. @ 24"L.C. 194" Lift, 24V |
| PDC-20 Series 24 Volt |
| PDC-20-60 24Volt |
2,000 Lbs. @ 24"L.C. 60" Lift, 24V |
| PDC-20-106 24Volt |
2,000 Lbs. @ 24"L.C. 106" Lift, 24V |
| PDC-20-130 24Volt |
2,000 Lbs. @ 24"L.C. 130" Lift, 24V |
| PDC-20-154 24Volt |
2,000 Lbs. @ 24"L.C. 154" Lift, 24V |
| PDC-20-168 24Volt |
2,000 Lbs. @ 24"L.C. 168" Lift, 24V |
| PDC-20-158 24Volt |
2,000 Lbs. @ 24"L.C. 158" Lift, 24V |
| PDC-20-194 24Volt |
2,000 Lbs. @ 24"L.C. 194" Lift, 24V |
| PDC-20A Series 24 Volt Short Chassis |
| PDC-20A-60 24Volt |
2,000 Lbs. @ 24"L.C. 60" Lift, 24V |
| PDC-20A-106 24Volt |
2,000 Lbs. @ 24"L.C. 106" Lift, 24V |
| PDC-20A-130 24Volt |
2,000 Lbs. @ 24"L.C. 130" Lift, 24V |
| PDC-20A-154 24Volt |
2,000 Lbs. @ 24"L.C. 154" Lift, 24V |
| PDC-20A-168 24Volt |
2,000 Lbs. @ 24"L.C. 168" Lift, 24V |
| PDC-25 Series 24 Volt |
| PDC-25-60 24Volt |
2,500 Lbs. @ 24"L.C. 60" Lift, 24V |
| PDC-25-106 24 Volt |
2,500 Lbs. @ 24"L.C. 106" Lift, 24V |
| PDC-25-130 24Volt |
2,500 Lbs. @ 24"L.C. 130" Lift, 24V |
| PDC-25-154 24Volt |
2,500 Lbs. @ 24"L.C. 154" Lift, 24V |
| PDC-25-158 24Volt |
2,500 Lbs. @ 24"L.C. 158" Lift, 24V |
| PDC-25-168 24Volt |
2,500 Lbs. @ 24"L.C. 168" Lift, 24V |
| PDC-25-194 24Volt |
2,500 Lbs. @ 24"L.C. 194" Lift, 24V |
| PDC-30 Series 24 Volt |
| PDC-30-60 24Volt |
3,000 Lbs. @ 24"L.C. 60" Lift, 24V |
| PDC-30-106 24Volt |
3,000 Lbs. @ 24"L.C. 106" Lift, 24V |
| PDC-30-130 24Volt |
3,000 Lbs. @ 24"L.C. 130" Lift, 24V |
| PDC-30-154 24Volt |
3,000 Lbs. @ 24"L.C. 154" Lift, 24V |
| PDC-30-158 24Volt |
3,000 Lbs. @ 24"L.C. 158" Lift, 24V |
| PDC-30-168 24Volt |
3,000 Lbs. @ 24"L.C. 168" Lift, 24V |
| PDC-30-194 24Volt |
3,000 Lbs. @ 24"L.C. 194" Lift, 24V |
| PDC-40 Series 24 Volt |
| PDC-40-60 24Volt |
4,000 Lbs. @ 24" L.C. 60" Lift, 24V |
| PDC-40-106 24Volt |
4,000 Lbs. @ 24"L.C. 106" Lift, 24V |
| PDC-40-130 24Volt |
4,000 Lbs. @ 24"L.C. 130" Lift, 24V |
| PDC-40-154 24Volt |
4,000 Lbs. @ 24"L.C. 154" Lift, 24V |
| PDC-40-158 24Volt |
4,000 Lbs. @ 24"L.C. 158" Lift, 24V |
| PDC-40-168 24Volt |
4,000 Lbs. @ 24"L.C. 168" Lift, 24V |
| PDC-40-194 24Volt |
4,000 Lbs. @ 24"L.C. 194" Lift, 24V |
About Big Joe | Product Finder | Online Catalog | Dealer Locator | Customer Service Center
Request Information | FAQ | Pre-Owned Equipment | Latest News | Contact Us | Site Map
|
|
